Accessories
EXAIR offers a complete line of accessories.
Valves
Back to Top
| Model | Description |
|---|---|
| 9012 | Manual Valve, 1/4 NPT |
| 900340 | Manual Valve, 3/8 NPT |
| 900343 | Manual Valve, 1/2 NPT |
| 900743 | Manual Valve, 3/4 NPT |
| 900346 | Manual Valve, 1 NPT |
| 900744 | Manual Valve, 1 - 1/4 NPT |
| 9040 | Foot Pedal Valve, 1/4 NPT |
Solenoid Valves
Solenoid Valves are available in a variety of flow rates and voltages. All models are UL Listed and are CE and RoHS compliant.
| Model # | Description |
|---|---|
9018 |
NEMA 4-4X Solenoid Valve, 110V-120V, 50/60Hz, 1/4 NPT, 40 SCFM (1133 SLPM) |
9020 |
Solenoid Valve, 120V, 50/60Hz, 1/4 NPT, 40 SCFM (1133 SLPM) |
9021 |
Solenoid Valve, 200-240V, 50/60Hz, 1/4 NPT, 40 SCFM (1133 SLPM) |
9024 |
NEMA 4-4X Solenoid Valve, 240V, 50/60Hz, 1/4 NPT, 40 SCFM (1133 SLPM) |
9059 |
NEMA 4-4X Solenoid Valve, 24VDC, 50/60Hz, 3/4 NPT, 200 SCFM (5664 SLPM) |
9031 |
Solenoid Valve, 24VDC, 50/60Hz, 1/4 NPT, 40 SCFM (1133 SLPM) |
9034 |
Solenoid Valve, 120V, 50/60Hz, 1/2 NPT, 100 SCFM (2832 SLPM) |
9035 |
Solenoid Valve, 240V, 50/60Hz, 1/2 NPT, 100 SCFM (2832 SLPM) |
9058 |
NEMA 4-4X Solenoid Valve, 24VDC, 50/60Hz, 1/2 NPT, 100 SCFM (2832 SLPM) |
9036 |
Solenoid Valve, 120V, 50/60Hz, 3/4 NPT, 200 SCFM (5664 SLPM) |
9037 |
Solenoid Valve, 240V, 50/60Hz, 3/4 NPT, 200 SCFM (5664 SLPM) |
9065 |
Solenoid Valve, 24VDC, 50/60Hz, 1 NPT, 350 SCFM (9911 SLPM) |
Thermostat
Back to Top
The adjustable thermostat is factory set at 95°F (35°C). It will normally hold ±2°F (1°C) of the desired temperature setting. It is rated 120V, 50/60HZ and is UL Recognized, CSA Certified.
| Model | Description |
|---|---|
| 9017 | Thermostat |
Magnetic Base
Back to Top
Magnetic bases are suited to applications where frequent movement of the air product is required. The powerful magnet permits horizontal or vertical mounting. A shutoff valve is provided that can be used to infinitely vary the force and flow.
| Model | Description |
|---|---|
| 9029 | One Outlet Swivel Magnetic Base with Shutoff Valve |
| 9042 | One Outlet Magnetic Base with Shutoff Valve |
| 9043 | Two Outlet Magnetic Base with Shutoff Valve |
Swivel Fitting can be used with air nozzles and many other
EXAIR products. They are available in 1/8, 1/4, 3/8 and 1/2
NPT sizes.
Swivel Fittings
Back to Top
EXAIR's Swivel Fittings make it easy to adjust the position of the Air Nozzles and Jets. The Swivel Fittings permit a movement of 25 degrees from the center axis for a total movement of 50 degrees. Type 303 Stainless Steel.
Model 9052 1/8 NPT Swivel Fitting
Model 9053 1/4 NPT Swivel Fitting
Model 9068 3/8 NPT Swivel Fitting
Model 9069 1/2 NPT Swivel Fitting
The Model 9041 Drum Dolly makes it easy
to move the Chip Vac or Drum Vac from one
work area to another.
Drum Dolly
Back to Top
The Model 9041 55 Gallon Drum Dolly has a 900 lb capacity and works with our Chip Vac and Reversible Drum Vac.
- Easy to roll, heavy-duty dolly makes it easy to transport 55 gallon drums
- 3" diameter ball bearing swivel casters that resist oil, water and impact
- All welded steel construction, zinc plated nuts and bolts
| Model | Capacity (lbs) | Drum Size (gal.) | Inside Diameter (in.) | Ship Weight (lbs.) |
|---|---|---|---|---|
| 9041 | 900 | 55 | 23-3/4 | 28 |
Air Hose
Back to Top
| Model | Description |
|---|---|
Compressed air hose (3/8" ID) is constructed of reinforced synthetic rubber to assure long life and protection against ozone, weathering, and temperatures up to 158°F (70°C). Includes a 1/4 NPT male brass fitting on each end. Hose lengths are 10', 20', 30', 40' and 50' (3.05m, 6.10m, 9.14m, 12.19m and 15.24m). Indicate the length with a dash. Example: A Model 900061-30 is a 30' long compressed air hose. |
|
| 900061- | Compressed Air Hose, 1/4 NPTM x 1/4 NPM |
| Conveying Hose | |||||||
|---|---|---|---|---|---|---|---|
Hose lengths are 10', 20', 30', 40' and 50' (3.05m, 6.10m, 9.14m, 12.19m and 15.24m). Select the hose model number (diameter) and indicate the length with a dash. Example: A Model 6931-20 is 1" ID Hose x 20' long. |
|||||||
| Model # | Description | Model # | Description | Model # | Description | ||
| 6928- | Hose 3/8" ID | 6931- | Hose 1" ID | 6934- | Hose 2" ID | ||
| 6929- | Hose 1/2" ID | 6932- | Hose 1-1/4" ID | 6935- | Hose 2-1/2" ID | ||
| 6930- | Hose 3/4" ID | 6933- | Hose 1-1/2" ID | 6936- | Hose 3" ID | ||
| 12 Foot (3.05m) Coiled Hoses | |||||||
|---|---|---|---|---|---|---|---|
| Model # | Description | Model # | Description | Model # | Description | ||
| 900106 | 1/8 NPT Coiled Hose With Swivel | 900750 | 1/4 NPT Coiled Hose With Swivel | 900751 | 3/8 NPT Coiled Hose With Swivel | ||
60 Gallon Receiver Tank
Back to Top
Some applications require an intermittent demand for a high volume of compressed air. This can cause fluctuations in pressure and volume throughout the compressed air system with some points being "starved" for compressed air. EXAIR's new Model 9500-60 60 Gallon Receiver Tank can be installed near the point of the high demand so there is an additional supply of compressed air available for a short duration. The time between the high volume demand occurrences should be long enough so the compressor has enough time to replenish the EXAIR 60 Gallon Receiver Tank.
The 60 gallon vertical steel tank with mounting feet saves floor space and meets the American Society of Mechanical Engineers (ASME) pressure vessel code. (It is not ASME rated for vacuum.) A drain valve is provided for placement at the bottom of the tank to discharge liquid and contaminants.
A user supplied check valve installed upstream of the receiver tank will maintain the tank at maximum pressure so upstream uses of compressed air do not deplete the tank. A user supplied needle valve can regulate the refilling of the receiver tank, effectively reducing the large intermittent air requirement into a smaller average demand.
|
|
||||||
Compressed Air Fittings
Back to Top
| Hex Nipple | ||
|---|---|---|
| Model # | Material | Thread Size |
| 9890 | Brass | 1/8 NPTM x 1/8 NPTM |
| 9944 | Brass | 1/4 NPTM x 1/4 NPTM |
| 9759 | Brass | 3/8 NPTM x 3/8 NPTM |
| 9760 | Brass | 1/2 NPTM x 1/2 NPTM |
| 9761 | Brass | 3/4 NPTM x 3/4 NPTM |
| 9958 | 304SS | 1/8 NPTM x 1/8 NPTM |
| 9959 | 304SS | 1/4 NPTM x 1/4 NPTM |
| 9960 | 304SS | 3/8 NPTM x 3/8 NPTM |
| 9961 | 304SS | 1/2 NPTM x 1/2 NPTM |
| Close Nipple | ||
| Model # | Material | Thread Size |
| 9551 | Brass | 1/4 NPTM x 1/4 NPTM |
| 9752 | Brass | 3/8 NPTM x 3/8 NPTM |
| 900745 | Brass | 1/2 NPTM x 1/2 NPTM |
| 900559 | Brass | 3/4 NPTM x 3/4 NPTM |
| 900309 | NP Brass | 1/8 NPTM x 1/8 NPTM |
| 900084 | NP Brass | 1/4 NPTM x 1/4 NPTM |
| 900435 | NP Brass | 3/8 NPTM x 3/8 NPTM |
| 900436 | NP Brass | 1/2 NPTM x 1/2 NPTM |
| 900409 | 316SS | 1/8 NPTM x 1/8 NPTM |
| 900160 | 316SS | 1/4 NPTM x 1/4 NPTM |
| 900505 | 316SS | 3/8 NPTM x 3/8 NPTM |
| 900506 | 316SS | 1/2 NPTM x 1/2 NPTM |
| Coupler | ||
| Model # | Material | Thread Size |
| 900453 | NP Brass | 1/8 NPTF x 1/8 NPTF |
| 9871 | Brass | 1/4 NPTF x 1/4 NPTF |
NPTM = NPT Male, NPTF = NPT Female, NP = Nickel Plated |
| Reducer | ||
|---|---|---|
| Model # | Material | Thread Size |
| 900405 | Brass | 1/4 NPTM x 1/8 NPTF |
| 900105 | Brass | 1/4 NPTF x 1/8 NPTM |
| 9946 | Brass | 1/4 NPTM x 1/8 NPTF |
| 9553 | Brass | 3/8 NPTM x 1/4 NPTM |
| 9897 | Brass | 1/2 NPTM x 3/8 NPTM |
| 900736 | Brass | 1/4 NPTM x 1/4 NPTM |
| 900622 | Brass | 1/2 NPTM x 1/4 NPTF |
| Tee | ||
| Model # | Material | Thread Size |
| 900005 | Brass | 1/4 NPTF x 1/4 NPTF x 1/4 NPTM |
| 9851 | Brass | 1/4 NPTM x 1/4 NPTM x 1/4 NPTM |
| 9971 | Brass | 3/8 NPTF x 1/4 NPTF x 3/8 NPTM |
| 9896 | Brass | 3/8 NPTF x 3/8 NPTF x 3/8 NPTF |
| 900621 | Brass | 1/2 NPTF x 1/2 NPTF x 1/2 NPTF |
| 900734 | Brass | 1/2 NPTF x 1/4 NPTF x 1/2 NPTF |
| Elbow | ||
| Model # | Material | Thread Size |
| 7674 | Brass | 1/8 NPTM x 1/8 NPTF 45° |
| 9555 | Brass | 1/4 NPTM x 1/4 NPTF 90° |
| 9895 | Brass | 3/8 NPTM x 3/8 NPTF 90° |
| 900073 | Brass | 1/4 NPTM x 3/8 Tube 90° |
| Cross | ||
| Model # | Material | Thread Size |
| 900735 | Brass | 1/2 NPTF x 1/2 NPTF |
| Bulkhead Fitting | ||
| Model # | Material | Thread Size |
| 900069 | Brass | 3/4 NPTM x 1/4 NPTF |
NPTM = NPT Male, NPTF = NPT Female, NP = Nickel Plated |
Mufflers and Filters
Back to Top
EXAIR Silencing Mufflers help to reduce work area noise produced by air exhausting from cylinders, valves and other air powered equipment. Per OSHA standard 1910.95, a worker must not be exposed to sound levels above 90 dBA for any eight hour shift of a 40 hour work week. Silencing Mufflers help plants meet this OSHA requirement by reducing the sound to safe levels below 90 dBA. They also eliminate harmful dead ended pressures. Each style of Silencing Muffler shown has a high airflow capacity, with low back pressure. Popular NPT sizes are ideal for new and existing installations.
EXAIR's Filter Separators remove water, dirt and rust from your compressed air system. They prevent these contaminants from plugging or damaging the compressed air products.
Stay Set Hoses
Back to Top
For applications where frequent repositioning of the Air Nozzle or Jet is required, the Flexible Stay Set Hoses are ideal. Simply mount the hose in close proximity to the application and bend it to aim the airstream at the target. Since the hose has "memory", it will not creep or bend. It always keeps the aim until physically moved to the next position.
Installation and Maintenance Sheets
Back To Top
These files are in the Adobe .PDF format.
The viewer is free and is available at
www.adobe.com.