GEN4™ Ion Air Jet™

Air saving GEN4 Ion Air Jet is an effective spot cleaner!

Eputec GEN4 Ion Air Jet

What Is The GEN4 Ion Air Jet?

EXAIR’s GEN4 Ion Air Jet delivers a concentrated airflow that can cover a precise spot without disturbing other areas. The GEN4 Ion Air jet is the mountable version of our GEN4 Ion Air Gun. This quiet, focused airstream provides incredibly fast static decay rates and cleaning ability. The GEN4 Ion Air Jet is the ideal way to remove static and dust from small parts prior to shrink wrapping, packaging, printing, painting or finishing.

GEN4 Ion AirJet

The Model 8194 GEN4 Ion Air Jet and Power
Supply neutralize and clean mouthwash
bottles before installing the tamper-proof
seal.

Why The GEN4 Ion Air Jet?

The GEN4 Ion Air Jet induces surrounding airflow at a ratio of 5:1, minimizing compressed air use and maximizing ionized airflow. Force can be adjusted from a “blast” to a “breeze”.

How The GEN4 Ion Air Jet Works

GEN4 Ion Air Jet Function

The GEN4 Ion Air Jet incorporates a High Velocity Air Jet and electrically energized emitter point. A small amount of compressed air is injected into the air jet (1) inducing a high volume flow of surrounding air (2) to pass through it. The emitter point (shockless) at the discharge end of the jet (3) ionizes the entire airstream. The result is a high volume flow of ionized air (4) capable of neutralizing high static charges in fractions of a second. An optional filter and regulator cleans the compressed air and allows infinite adjustment of airflow and velocity.

Your Choice Of Permanent Mount or Flexible Stay Set Hose™

Ion Air Jet Fußpedal Modell 9040

The optional Model 9060 Foot Pedal
provides convenient hands free operation.

For permanent mount applications, the compact GEN4 Ion Air Jet is the best choice since it is lightweight and easy to install using the 1/8″ NPT male inlet. For applications where frequent repositioning is required, the flexible Stay Set Ion Air Jet is ideal. This version can be placed in close proximity and the hose bent to aim the ionized airstream at the localized area. Since the hose has “memory” it will not creep or bend, always keeping the aim until physically moved to the next position.

The GEN4 Stay Set Ion Air Jet comes complete with a magnetic base that allows easy mounting and portability on a machine, a bench or other surface. A shutoff valve on the base provides infinite control of the force and flow. For hands free operation, an optional Model 9040 Foot Pedal (requires floor or machine mounting) is available.

  • 3-D Parts
  • Bottle cleaning
  • Printer surfaces
  • Part cleaning
Clean Dust from a Glass Lens

The Model 8194-9362 Stay Set Ion Air Jet
Kit cleans dust from a glass lens prior to
installation on a gauge.

  • Low cost
  • Rapid static decay
  • Quiet
  • Shockless, non-radioactive
Ion Air Jet performance
Pressure Supply Air Consumption Sound Level Dissipates 5kV*
PSIG BAR SLPM dBA Seconds
20 1,4 209 67 0,45
40 2,8 325 74 0,33
60 4,1 447 79 0,24
80 5,5 622 82 0,18
100 6,9 679 85 0,18

* 6″ (152mm) from target

BSP Threads Available – Contact Us.

GEN4 Ion Air Jet

Model Description
8194 GEN4 Ion Air Jet includes 5′ (1.5m) of shielded cable*
* For special length cables, please contact distributor.
GEN4 Stay Set Ion Air Jet

Model Description
8194-9362 GEN4 Stay Set Ion Air Jet includes 5′ (1.5m) shielded cable*, one outlet magnetic base with shutoff valve and 12″ (305mm) Stay Set Hose)
Accessories and Components

Model Description
7960 Power Supply Only (115V, 50/60 Hz or 230V, 50/60 Hz), 2 Outlets
7961 Power Supply Only (115V, 50/60 Hz or 230V, 50/60 Hz), 4 Outlets
7905 Static Meter
9040 Foot Pedal, 1/4 NPT, 60 SCFM (1698 SLPM)
Ion Air Jet application
Elektronischer Strömungsschalter für Druckluft (EFC)EXAIR’s EFC is an electronic flow control that dramatically reduces compressed air costs by turning off the compressed air when no part is present. This minimizes compressed air use for blow off, drying, cooling, conveying and static elimination operations. The EFC combines a photoelectric sensor with a timing control that limits compressed air use by turning it off when no part is present. Visit the EFC Page for more information.

EXAIR GEN4 Model 7960 or 7961 Power Supplies (5 kV) is required for operation.

For use with 5 kVrms, 5 milliamperes (max.) power supply, Model 7960 (115V or 230V – selectable Voltage), 2 outlets. Power Supplies are UL Listed to U.S. and Canadian safety standards.

For use with 5 kVrms, 5 milliamperes (max.) power supply, Model 7961 (115V or 230V – selectable Voltage), 4 outlets. Power Supplies are UL Listed to U.S. and Canadian safety standards.