Vac-u-Gun™ – Vacuum, blow and transfer with no moving parts!
Rugged die cast construction for industrial use.
What Is The Vac-u-Gun?
The Vac-u-Gun is a low cost solution to a wide variety of industrial housekeeping problems. The Vac-u-Gun is a vacuum gun, a blow gun and a transfer tool all-in-one. Lightweight and easy to use, the Vac-u-Gun has durable die cast construction with no moving parts to wear out.
Model 6192 Vac-u-Gun Collection
System with bag vacuums absorbent
and chips.
Why The Vac-u-Gun?
The Vac-u-Gun uses less compressed air than an ordinary blow gun. It injects a small amount of compressed air through directed nozzles to produce a vacuum on one end and a high output flow on the other. The amplified output flow is 12 times the air consumption rate.
The Vac-u-Gun offers a more efficient way to blowoff, cool, dry and clean. In vacuum mode, work surfaces can be easily cleaned by vacuuming the debris away instead of blowing it off the surface only to sweep it up later. In blow mode, the Vac-u-Gun has a large 1-1/4″ (32mm) diameter that allows it to cover more surface area in less time compared to ordinary air guns. Transferring materials over long distance is also possible using the smooth bore vacuum hose. Three Vac-u-Gun Systems with tools are available.
Versatile
Reverse the direction of the nozzle insert to
change from vacuum to blowoff.
In seconds, the Vac-u-Gun can be transformed from a powerful vacuum gun into an efficient blow gun or into a transfer tool for lightweight materials. Each Vac-u-Gun System comes complete with a set of attachments to suit numerous industrial applications.
In blow mode, the Vac-u-Gun consumes
less air than ordinary blow guns.
- Vacuum Shavings
- Vacuum Absorbent
- Vacuum Sawdust
- Vacuum Spills
Transfer:
- Transfer Small parts
- Transfer Pellets
- Transfer Trim
Blowing:
- Blow Chips
- Blow Water
- Blow Coolant
- Blow Scrap
- No moving parts-maintenance free
- Low cost
- Durable – die cast construction
- Eliminates shock hazard – No electricity
- Meets OSHA pressure requirements
- Vacuum or blow off
- Lightweight and portable
- Quiet
- Versatile
| Pressure Supply | Air Consumption | Vacuum | Force | |||||
|---|---|---|---|---|---|---|---|---|
| PSIG | BAR | SCFM | SLPM | “H2O | kPa | Ozs | Grams | INLET |
| 80 | 5.5 | 13 | 368 | -29,5 | -7 | 9 | 255 | 1/4″ NPT |
| Model | Description |
|---|---|
| 6192 | Collection System – includes Vac-u-Gun, re-useable bag, brush, crevice tool, skimmer tool and (2) extension wands. |
| 6292 | Transfer System – includes Vac-u-Gun, 10′ (3m) vacuum hose, brush, crevice tool, skimmer tool and (2) extension wands. |
| 6392 | All Purpose System – includes Vac-u-Gun, re-useable bag, 10′ (3m) vacuum hose, brush, crevice tool, skimmer tool and (2) extension wands. |
| 6092 | Vac-u-Gun Only – included with all systems shown above |
Model 6192 Collection System
Model 6292 Transfer System
Model 6392 All Purpose System
| Model | Description |
|---|---|
| XXXX | For Filters and Separators, please contact us. |
| 1903 | Trigger replacement part for Vac-u-Gun 6092 access + valve |
| 6565 | Crevice/siphon nozzle for Vac-u-Gun and Drum Vac, for tube 6568 |
| 6566 | Flat wiper nozzle for Vac-u-Gun and Drum Vac, 133mm wide, for tube 6568 |
| 6568 | Extension tube 19″ to hose 6569 from Drum Vac, Chip Vac, Vac-u-Gun |
| 6583 | Suction hose 3m, ID 1.25 inch for Vac-u-Gun |
| 6584 | Filter bag for Vac-u-Gun, volume approx 3.5 liters (for materials approx. >50µ), |
| 6585 | Round nozzle for Vac-u-Gun |
| 6603 | Threaded hose clamp for hose 1 1/2″ und 2″ |
| 6608 | Hose clamp for hose 3/4″ + 1″ + 1 1/4″ and for replacement filter for Vac-u-Gun |
| 9005 | Oil separator – 3/8 NPT, 425-1048 l/min. (15 – 37 SCFM) |