Back Blow Nozzles – Models 1004SS, 1006SS and 1008SS

EXAIR’s new models 1004SS, 1006SS and 1008SS Back Blow Nozzle are engineered to clean inside of pipe, tube, hose or channel. An array of holes provide a forceful 360 degree airflow to clear out coolant, chips or debris created from machining processes. These nozzles prevent blowing chips further into a pipe or out the end of the pipe, which is a safety hazard. Since airflow is directed back toward the operator, personal protective like chips shields is recommended when in use. All Back Blow Nozzles are made of Type 316 Stainless Steel. These nozzles are also available on Safety Air Guns.

Performance

Specifications
ModelAir
Consumption
Sound LevelBest with:
Pipe Inside Diameters
SLPMdBA (5,5 bar)
1004SS127751/4″ – 1″ (6,3–25,4 mm)
1006SS622807/8″ – 4″ (22 – 102 mm)
1008SS1614892″ – 16″ (51 – 406 mm)

Dimensions

Dimensions
MODELABC HexD Inlet
1004SSZoll0,590,20M4x0,5
mm1554,7
1006SSZoll10,755/81/4 NPT
mm251916
1008SSZoll21,501 13/321 NPT
mm513836

Airflow Pattern Model 1004SS

Back Blow Nozzle Dimensions

Airflow Pattern Models 1006SS and 1008SS

Back Blow Nozzle Airflow Pattern

Chip Shields should be used to protect operators from debris. A Model 901650 Chip Shield is for M4 x 0.5 extensions and a Model 901222 is available for 1/4″ NPT extensions.

Extension Pipes

Extensions provide the necessary reach to clean out your pipe, tube, hose or channel. Available up to 72” long.

Extension Pipes
ModelDescription
94926″ (152 mm) Aluminum, M4x0,5
949312″ (305 mm) Aluminum, M4x0,5
949524″ (610 mm) Aluminum, M4x0,5
949736″ (914 mm) Aluminum, M4x0,5
91876″ (152 mm) Aluminum, 1/4″ NPT
918812″ (305 mm) Aluminum, 1/4″ NPT
918918″ (457 mm) Aluminum, 1/4″ NPT
919024″ (610 mm) Aluminum, 1/4″ NPT
919136″ (914 mm) Aluminum, 1/4″ NPT
919248″ (1.219 mm) Aluminum, 1/4″ NPT
919360″ (1.524 mm) Aluminum, 1/4″ NPT
919472″ (1.829 mm) Aluminum, 1/4″ NPT
90035312″ (305 mm) Aluminum, 1″ NPT
90125436″ (914 mm) Aluminum, 1″ NPT
90125972″ (1.829 mm) Aluminum, 1″ NPT