Lateral Packer

HD Lateral Packers DN 25-1000 mm, Length up to 5 m

HD rehabilitation packer for straight pipes. Curve-compatible up to 45 degrees. Multi-dimensional rehabilitation packers with unique expansion, which are also suitable for large dimensional jumps: e.g. a DN 125-300 Lateral Packer can cover a whole 5 pipe dimensions. Upgradeable with Flex Adapter. Various models for nominal diameters from 25 – 1000 mm and various lengths up to 5000 mm available from us.

HD Lateral Packers: Versions and technical details

Bogenpacker

HD Bendy packer DN 40-230 mm, Length up to bis 1300 mm

HD Bendy packer for sewer rehabilitation in pipe bends. Multidimensional bend rehabilitation packer from 45° to 180° degrees with small packer diameter. Covers up to 3 dimensions. Dimensionally stable arch packer without cross-sectional constriction in pipe bends, suitable for all pipe materials. Can be processed with conventional ECR glass fibre mats. Various designs from DN 40 – 230 mm available from us.

Hausanschluss Packer mit Bürsten

House connection packer with brushes 2.5 bar

Inflatable packer with brushes, 2.5 bar. Sizes available: diameter nominal from 50 to 200 mm and length 0.7 to 5.0 meters.

The unique design of our inflatable packers always enables central position of the packer no matter what pipe diameter has to be repaired. There is no risk for the packer to be stuck while being pushed or pulled through out the pipe. The brush sliding ends are made of material with reflecting properties against resin and can easily be replaced with new ones.

Lateral Packer zur Kanalsanierung / Reparatur von Hausleitungen

Lateral Packers

Lateral packers are products that are used to repair laterals (home pipelines). Lateral packers are manufactured from SBR+NR mixed rubber and strong fabrics. They are able to run between -30°C and + 70°C. They are tested at the 1,3 times higher than their pressure and have very high bursting pressure.

Bogenpacker zur Sanierung in Rohrbögen

Elbow packer for rehabilitation in pipe bends

Flexible elbow packers for rehabilitation work in pipe bends of various lengths. Very robust packers made of SBR + NR-mixed rubber and strengthening fabric. Temperature range between -30° C and +70° C. Tested at 1.3 times the working pressure. Different models in lengths up to 5 m for applications from 50 – 170 mm available from us.

Flex-Adapter

Flex Adapter for renovation packers, shut-off and test bladders

Flex Adapter in various designs. Flex adapters make sheet travel more flexible and thus enable a new spectrum of leak tests in widely ramified drainage systems. Available with various couplings/connections, see technical details.

Schiebestange blau

Push bar blue

Push bar blue available in lengths 1.0 – 3.0 meters.

Schiebestange blau

Push bar blue with hexagonal coupling

Push bar blue with hexagonal coupling, available in lengths of 1.5 – 3.0 meters.

Schiebestange blau

Push bar gray with NW5 coupling

Push bar gray with NW5 coupling, available in lengths of 0.5 – 2.0 meters.

Carbolith Harz

Carbolith PL resin for partial sewer rehabilitation

The HD resin system is balanced for high as well as low processing temperatures. The hardening process is controllable individual. We offer non-foaming plasticised two-component resin with good adhension even on moist surfaces for bonding partial liners at sewer rehabilitation. DIBt approval (German Centre of Competence for Construction).

  • impregnates fiber glass mats (Advantex ®)
  • adheres to moist surfaces
  • well hardens in thin layers
  • formwork can be easily demolded
  • is resistant to aggressive water, acids and alkalise

Carbolith PL resin: Versions and technical details

ECR GFK Laminat

GFK Fiberglass Laminate 1387 g/m² in width 34 – 130 cm from DN 100-250

Fiberglass complex multipatch ECR Advantex fabric layer and random arrangement of fibers.
The Fiberglass laminates are manufactored solely of non-corroding glass. They consist of one glas fibre mat and one mat with random arrangement of fibers, which are sewed up to a textile rowing.

Laminat 1387 g/m²: Versions and technical details

ECR GFK Laminat

GFK Fiberglass Laminate 1081 g/m² in width 34 – 130 cm from DN 100-200

Fiberglass complex multipatch ECR Advantex fabric layer and random arrangement of fibers.
The Fiberglass laminates are manufactored solely of non-corroding glass. They consist of one glas fibre mat and one mat with random arrangement of fibers, which are sewed up to a textile rowing.

Laminat 1387 g/m²: Versions and technical details

Sanierungszubehör-SET

Refurbishment set 1 – Suitable for pipes with a diameter of 100 – 200 mm

Refurbishment set with a thin ECR GRP laminate mat, resin container for pipes with a diameter of 100 mm – 200 mm.

Set details:

  • 1 x PE stretch film for refurbishment packer to reduce the load on your packer
  • 1 x complete container of refurbishment resin with curing agent for fast work
    (2 x CarbolithPL 3-component comp. B, 21 kg; 1 x CarbolithPL 3-component comp. A, 28 kg;
    1 x CarbolithPL 3-component comp. C, 1 kg)
  • 1 x ECR GRP laminate (mat), thin version (1,081 g/m²) cut for DN 100 – DN 200, roll width 34 – 68 cm
Sanierungszubehör-SET

Refurbishment set 2 – Suitable for pipes with a diameter of 100 – 250 mm

Refurbishment set with a thick ECR GRP laminate mat, resin container and PE stretch film.

Set details:

  • 1 x PE stretch film for refurbishment packer to reduce the load on your packer
  • 1 x complete container of refurbishment resin with curing agent for fast work
    (2 x CarbolithPL 3-component comp. B, 21 kg; 1 x CarbolithPL 3-component comp. A, 28 kg;
    1 x CarbolithPL 3-component comp. C, 1 kg)
  • 1 x ECR GRP laminate (mat), thick version (1,387 g/m²) cut for DN 100 – DN 250, roll width 34 – 82 cm
Sanierungszubehör-SET

Refurbishment set complete package 1 – Suitable for pipes with a diameter of 100 – 200 mm

Complete package with a thin ECR GRP laminate mat, a refurbishment packer (Partliner) 1 metre length, five push rods (2 metres each), resin container and one roll of PE-stretch film.

Set details:

  • 1 x Refurbishment packer DN 70 – 100 mm/ DN 80 – 125 mm/ DN 100 – 150 mm/ DN 150 – 200 mm, 1 metre length
  • 1 x roll of PE stretch film for refurbishment packer to reduce the load on your packer
  • 1 x complete container of refurbishment resin with curing agent for fast work
    (2 x CarbolithPL 3-component comp. B, 21 kg; 1 x CarbolithPL 3-component comp. A, 28 kg;
    1 x CarbolithPL 3-component comp. C, 1 kg)
  • 1 x complete roll ECR GRP laminate mat, thin version (1,081 g/m²) cut for DN 100 – DN 200
  • 5 x push rod (2 metres each), combinable
Sanierungszubehör-SET

Refurbishment set complete package 2 – Suitable for pipes with a diameter of 100 – 250 mm

Complete package with a thick ECR GRP laminate mat, one refurbishment packer (Partliner) 1 metre length, five push rods (2 metres each), resin container and one roll of PE-stretch film.

Set details:

  • 1 x Lateral packer, refurbishment packer, field of application DN 70 – 100 mm/ DN 80 – 125 mm/ DN 100 – 150 mm/ DN 150 – 200 mm, 1 metre length
  • 1 x roll of PE stretch film for refurbishment packer to reduce the load on your packer
  • 1 x complete container of refurbishment resin with curing agent for fast work
    (2 x CarbolithPL 3-component comp. B, 21 kg; 1 x CarbolithPL 3-component comp. A, 28 kg;
    1 x CarbolithPL 3-component comp. C, 1 kg)
  • 1 x ECR GRP laminate (mat), thick version (1,387 g/m²) cut for DN 100 – DN 250, roll width 34 – 82 cm
  • 5 x push rod blue, length 2 metres, combinable